MHEV Battery Cooling Fan (G2422547): Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

Disconnect the 12 V system.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT
Remove the Mild Hybrid Electric Vehicle (MHEV) battery housing air duct.
Refer to: MHEV BATTERY HOUSING AIR DUCT - 110

Refer to: MHEV BATTERY HOUSING AIR DUCT - 90
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Release the 2 wiring harness clips from the MHEV battery cover.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the 2 bolts.
- Remove the nut.
- Remove the MHEV battery cover.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Disconnect the electrical connector.
- Release the wiring harness clip.
- Remove the 2 bolts.
- Remove the MHEV battery cooling fan.