LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Battery, Mounting And Cables - Vehicles With: MHEV -- Defender/L663) >> Battery, Mounting And Cables - Vehicles With: MHEV >> Removal And Installation >> MHEV Battery Cooling Fan (G2422547) >> Installation

MHEV Battery Cooling Fan (G2422547): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the MHEV  battery cooling fan.
    • Install and tighten the 2 bolts.

      Torque  : 3.2 Nm 

    • Install the wiring harness clip.
    • Connect the electrical connector.
    • Install the MHEV  battery cover.
    • Install and tighten the 2 bolts.

      Torque  : 6 Nm 

    • Install and tighten the nut.

      Torque  : 6 Nm 

  3. Install the 2 wiring harness clips to the MHEV  battery cover.
  4. Install the MHEV  battery housing air duct.

    Refer to: MHEV BATTERY HOUSING AIR DUCT - 110 

    Refer to: MHEV BATTERY HOUSING AIR DUCT - 90 

  5. Connect the 12 V system.

    Refer to: 12V SYSTEM DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals