LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Battery, Mounting And Cables - Vehicles With: MHEV -- Defender/L663) >> Battery, Mounting And Cables - Vehicles With: MHEV >> Removal And Installation >> MHEV Battery Breather Hose (G2422560) >> Installation

MHEV Battery Breather Hose (G2422560): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the MHEV  battery breather hose.

    Renew Part: MHEV battery breather hose Quantity: 1  .

  2. Connect the MHEV  battery breather hose to the vehicle body.
  3. Install the 3 clips.
  4. Connect the MHEV  battery breather hose to the MHEV  battery.
    • Install the AAM  .
    • Install and tighten the 4 nuts.

      Torque  : 10 Nm 

    • Install the 2 wiring harness clips.
    • Connect the 5 electrical connectors.
  7. Install the loadspace left side trim panel.

    Refer to: LEFT LOADSPACE TRIM PANEL - [+] 7 SEAT CONFIGURATION, 110

    Refer to: LEFT LOADSPACE TRIM PANEL - 110, VEHICLES WITH: 5 SEATS

    Refer to: LEFT LOADSPACE TRIM PANEL - 90

  8. Power up the MHEV  system.

    Refer to: MHEV POWER DOWN/UP 

scientia non olet · About LEMON Manuals