LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Cooling - INGENIUM I6 3.0L Petrol -- Defender/L663) >> Engine Cooling - INGENIUM I6 3.0L Petrol (G2344343) >> Removal And Installation >> Radiator (G2300891) >> Installation

Radiator (G2300891): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the A/C  condenser.
    • Install and tighten the 2 bolts.

      Torque  : 4.5 Nm 

    • Install the front electric cooling fan.
    • Install and tighten the 2 bolts.

      Torque  : 7 Nm 

  3. Install the cooling module.

    Refer to: COOLING MODULE 

  4. Fill the engine cooling system with the correct amount of coolant fluid.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

  5. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS

scientia non olet · About LEMON Manuals