LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Cooling - INGENIUM I6 3.0L Petrol -- Defender/L663) >> Engine Cooling - INGENIUM I6 3.0L Petrol (G2344343) >> Removal And Installation >> Coolant Level Sensor (G2412917) >> Removal

Coolant Level Sensor (G2412917): Removal

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the coolant expansion tank.

    Refer to: COOLANT EXPANSION TANK 

  2. CAUTION: Do not use excessive force to remove the coolant level sensor. Failure to follow this instruction may result in damage to the vehicle.
    G15324768Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the coolant level sensor.