Charge Air Cooler Inlet Pipe (G2323052): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the coolant hose.
- Attach the 2 coolant hose clips.
- Move aside the coolant hose.
- Attach the 2 coolant hose clips.
- Install the coolant hose.
- Attach the 2 coolant hose clips.
Vacuum fill the coolant system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
Install the engine cover.
Refer to: ENGINE COVER - INGENIUM I6 3.0L PETROL