Engine Cooling - INGENIUM I6 3.0L Petrol (G2341927): Description: Radiator
| ITEM | DESCRIPTION |
|---|---|
| 1 | Hose connection - Coolant expansion tank |
| 2 | Upper hose - Engine coolant inlet |
| 3 | Lower hose - Engine coolant outlet |
| 4 | Radiator drain plug |
| 5 | Hose connection - Automatic Transmission Fluid (ATF) cooler |
The radiator is a vertical flow type with an aluminum core and plastic end tanks in the upper and lower position of the radiator. The radiator uses brazed aluminum tube technology to reduce weight.
The radiator locates in the vehicle by locating spigots and supports integrated into the end tanks. The supports are installed in rubber isolator bushes in the lower support bracket. The upper mounting of the radiator is through the hood latch panel attached to the vehicle body.
A drain plug integrates on the bottom of the radiator. Engine coolant outlet and inlet connections are incorporated into the upper and lower end tanks respectively.
A low temperature zone is located at the left side of the radiator and provides cooled engine coolant for the Automatic Transmission Fluid (ATF) cooler.