Auto Stop/Start Soft Key
WARNING: This page is about a different variant/trim than selected.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Auto stop/start soft key |
| 2 | Interactive Control Display Module (ICDM) |
On vehicles with InControl Touch Pro Duo infotainment system, the Interactive Control Display Module (ICDM) is installed to the instrument panel. The auto stop/start soft key can be accessed from the 'Vehicle' menu on the ICDM. When the driver enables or disables the auto stop/start system, the request is transmitted from the ICDM to the Body Control Module/Gateway Module (BCM/GWM). The request message is transmitted through the High Speed (HS) Controller Area Network (CAN) Human Machine Interface (HMI) systems bus.