Rear Silencer (G2823262): Installation
WARNING: This page is about a different variant/trim than selected.
-
- Install the 2 exhaust actuator control valves to the rear silencer.
- Install and tighten the 6 bolts to the 2 exhaust actuator control valves.
Torque : 10 Nm
-
- With assistance, install the rear silencer.
- Install the 4 exhaust mounting rubbers.
-
- Install and tighten the 2 exhaust clamps.
Torque : 55 Nm
- Connect the 2 electrical connectors to the 2 exhaust actuator control valves.
- Install the 4 wiring harness clips.
- Install and tighten the 2 exhaust clamps.