LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Battery, Mounting And Cables - Vehicles With: PHEV -- Defender/L663) >> Battery, Mounting And Cables - Vehicles With: PHEV (G2608197) >> Removal And Installation >> PHEV Battery Coolant Expansion Tank (G2769925) >> Installation

PHEV Battery Coolant Expansion Tank (G2769925): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the PHEV  battery coolant expansion tank.
    • Install and tighten the nut.

      Torque  : 9 Nm 

  2. Connect the 2 coolant hoses.
  3. Connect the coolant expansion tank overflow pipe.
  4. Fill and bleed the PHEV  battery cooling system.

    Refer to: PHEV BATTERY COOLING SYSTEM DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals