LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Battery, Mounting And Cables - Vehicles With: PHEV -- Defender/L663) >> Battery, Mounting And Cables - Vehicles With: PHEV (G2608197) >> Removal And Installation >> Coolant Diverter Valve (G2769928) >> Installation

Coolant Diverter Valve (G2769928): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the coolant diverter valve.
    • Install and tighten the 4 nuts.

      Torque  : 9 Nm 

    • Connect the 3 coolant hoses.
    • Connect the electrical connector.
  2. Install the coolant pipe clip.
  3. Fill and bleed the PHEV  battery cooling system.

    Refer to: PHEV BATTERY COOLING SYSTEM DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals