Front Silencer (G2524048): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the exhaust hanger bracket to the front silencer.
- Install the 2 exhaust mounting rubbers.
- Install the front silencer.
- Install and tighten the 4 exhaust hanger bracket bolts.
  Torque : 25 Nm
- Install and tighten the new front exhaust clamp.
  Renew Part: Front exhaust clamp Quantity: 1 .
  
  Torque : 56 Nm
Install the rear silencer.
Refer to: REAR SILENCER .
- Install the center undershield.
- Install and tighten the 4 bolts.
  Torque : 7 Nm
- Install and tighten the 2 nuts.
  Torque : 7 Nm
Install the engine undershield.
Refer to: ENGINE UNDERSHIELD .