LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Emission Control - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- Range Rover Velar/L560) >> Engine Emission Control - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV >> Removal And Installation >> Valve Cover Vent Oil Separator (G2142088) >> Installation

Valve Cover Vent Oil Separator (G2142088): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that all mating surfaces are clean and free from foreign material.
    • Install a new seal.

      Renew Part: Valve cover vent oil separator to cylinder head seal Quantity: 1 . 

    • Install the valve cover vent oil separator.

      Torque  : 12 Nm 

  2. Connect the 2 valve cover breather hoses.
  3. Install the engine cover.
scientia non olet · About LEMON Manuals