LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol -- Range Rover Velar/L560) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Turbocharger Oil Supply Tube (G2027778) >> Installation

Turbocharger Oil Supply Tube (G2027778): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the turbocharger oil feed pipe.
    • Install new banjo bolt washers.

      Renew Part: Turbocharger oil feed pipe banjo bolt washers Quantity: 4 . 

    • Install banjo bolts.

      Torque  : 18 Nm 

  2. Install the intake air resonator.

    Refer to: INTAKE AIR RESONATOR .

scientia non olet · About LEMON Manuals