Auto Stop/Start Warning Indicator
WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
The auto stop/start warning indicator is located in the Instrument Cluster (IC). The auto stop/start warning indicator is controlled by the Powertrain Control Module (PCM). To illuminate the auto stop/start warning indicator, the Powertrain Control Module (PCM) sends signals to the Body Control Module/Gateway Module (BCM/GWM) through the FlexRay bus. The BCM/GWM transmits the message to the IC through the High Speed (HS) Controller Area Network (CAN) comfort systems bus.