LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V8 S/C 5.0L Petrol >> Removal And Installation >> Radiator (G2244105) >> Installation

Radiator (G2244105): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator to the cooling module assembly.
  2. Connect the coolant hose to the radiator.
  3. Install the cooling fan motor and shroud.

    Refer to: ELECTRIC COOLING FAN AND SHROUD 

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals