LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V8 S/C 5.0L Petrol >> Removal And Installation >> Engine Coolant Level Switch (G2424569) >> Installation

Engine Coolant Level Switch (G2424569): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine coolant level switch.
  2. Connect the electrical connector.
    • Reposition the coolant expansion tank into the correct location.
    • Install and tighten the bolt.

      Torque  : 7 Nm 

    • Reposition the wiring harness into the correct location.
    • Install the 6 clips.
scientia non olet · About LEMON Manuals