Cylinder Head Coolant Outlet Pipe (G2732374): Installation
WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
- CAUTION: Make sure that all traces of excess coolant are cleaned from the cylinder head area.
- Install the lower pipe.
Renew Part: Cylinder head coolant outlet lower pipe Quantity: 1 .
- Install and tighten the 2 bolts.
Torque : 11.5 Nm
- Install the lower pipe.
- Make sure a new component is installed.
Renew Part: Cylinder head coolant outlet upper pipe Quantity: 1 .
- Install the supercharger.
Refer to: SUPERCHARGER
Refer to: SUPERCHARGER