LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V8 S/C 5.0L Petrol >> Removal And Installation >> Coolant Expansion Tank (G2254546) >> Installation

Coolant Expansion Tank (G2254546): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
    • Connect the electrical connector and hose to the coolant expansion tank.
    • Remove the hose clamp from the coolant hose.
    • Install the coolant expansion tank and bolt.
  2. Connect the coolant hose to the coolant expansion tank.
  3. CAUTION: Correct installation of the coolant expansion tank cap can be obtained by tightening the cap until 3 audible clicks are heard.

    Fill the coolant expansion tank to the 'MAX' level mark.

scientia non olet · About LEMON Manuals