LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V8 S/C 5.0L Petrol >> Removal And Installation >> Auxiliary Radiator (G2244101) >> Installation

Auxiliary Radiator (G2244101): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: An audible click is heard when the clips are fully latched.
    • Install the auxiliary radiator assembly.
    • Make sure the 3 clips are correctly installed.
    • Install and tighten the 3 bolts.

      Torque  : 7 Nm 

  2. Connect the upper coolant hose.
  3. Connect the lower coolant hose.
  4. Install the front wheel arch liner.

    Refer to: FRONT WHEEL ARCH LINER

  5. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals