LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Engine - V8 S/C 5.0L Petrol >> Removal And Installation >> Crankshaft Front Seal (G2244071) >> Installation

Crankshaft Front Seal (G2244071): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Take extra care not to damage the seal.

    Using the special tool, install the front crankshaft oil seal.

    Special Tool(s): 303-1434 

    Torque  : 26 Nm 

  2. Install the crankshaft pulley.

    Refer to: CRANKSHAFT PULLEY .

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals