U0416-46: Invalid Data Received From Vehicle Dynamics Control Module - Calibration/Parameter memory failure: Action
WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The presence of CAN errors and loss of CAN data from the anti-lock brake system control module may result in other powertrain DTCs which may require appropriate investigation PRIOR to specifically investigating this fault
- Vehicle Conditions to enable DTC Logging Strategy
- Ignition on
- Prioritized Checks to Perform
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, perform a CAN network integrity test. Refer to the electrical circuit diagrams and check the high speed CAN bus (powertrain) circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the Jaguar Land Rover approved diagnostic equipment, check the anti-lock brake system control module for related DTCs and refer to the relevant DTC index