Exhaust System - V8 S/C 5.0L Petrol (G2263555): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.

- Install the 2 catalytic converters.
- Install and tighten the 4 nuts.
  Torque : 55 Nm
- Connect the 4 Heated Oxygen Sensor (HO2S) electrical connectors.
NOTE: This step requires the aid of another technician.
- Install the front silencer.
- Secure the 2 mounting rubbers.
- Install and tighten the 2 new clamps.
  Renew Part: Exhaust clamp Quantity: 2 .
  
  Torque : 55 Nm
- Install the center body undershield.
- Install and tighten the 4 bolts and 2 nuts.
  Torque : 10 Nm
Install rear silencer.
Refer to: REAR SILENCER .