LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V8 S/C 5.0L Petrol >> Removal And Installation >> Left Variable Valve Timing Oil Control Solenoid (G2244164) >> Installation

Left Variable Valve Timing Oil Control Solenoid (G2244164): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the intake and exhaust variable valve timing (VVT) solenoids.
    • Evenly and progressively install and tighten the 4 bolts.

      Torque  : 10 Nm 

  2. Connect the 2 electrical connectors.
  3. Install the thermostat housing.

    Refer to: THERMOSTAT HOUSING

scientia non olet · About LEMON Manuals