LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V8 S/C 5.0L Petrol >> Removal And Installation >> Left Camshaft Position Sensor (G2244145) >> Installation

Left Camshaft Position Sensor (G2244145): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the 2 camshaft position sensors.
    • Install and tighten the 2 bolts.

      Torque  : 10 Nm 

    • Connect the 2 electrical connectors.
  2. Install the thermostat housing.

    Refer to: THERMOSTAT HOUSING

scientia non olet · About LEMON Manuals