LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V8 S/C 5.0L Petrol >> Removal And Installation >> Engine Oil Level Sensor (G2244149) >> Installation

Engine Oil Level Sensor (G2244149): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring seal to the engine oil level sensor.

    Renew Part: Oil level sensor O-ring seal(s) Quantity: 1 . 

    • Install the engine oil level sensor.
    • Install and tighten the 3 bolts.

      Torque  : 12 Nm 

    • Connect the electrical connector.
  3. Vacuum fill the engine with engine oil.

    Refer to: ENGINE OIL VACUUM DRAINING AND FILLING

  4. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals