LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V8 S/C 5.0L Petrol >> Removal And Installation >> Engine Coolant Temperature Sensor (G2249553) >> Installation

Engine Coolant Temperature Sensor (G2249553): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the engine coolant temperature sensor.
    • Connect the electrical connector.
  2. Install the secondary bulkhead right inner panel.

    Refer to: SECONDARY BULKHEAD RIGHT INNER PANEL - INGENIUM I6 3.0L DIESEL

  3. Vacuum fill the engine cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

scientia non olet · About LEMON Manuals