LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V8 S/C 5.0L Petrol >> Removal And Installation >> Crankshaft Position Sensor (G2244150) >> Installation

Crankshaft Position Sensor (G2244150): Installation

WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the crankshaft position (CKP) sensor.
    • Install the bolt.

      Torque  : 10 Nm 

    • Connect the electrical connector.
  2. Install the transmission undershield.

    Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals