Possible Causes
WARNING: This page is about a different car, the 2020 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. The powertrain control module checks that the hard wired crank request from the body control module matches the network powermode signal.
- This DTC is set when the powertrain control module has detected a power measurement for a period longer than expected or has detected a power measurement when another value was expected.
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Starter request circuit short circuit to power