LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling INGENIUM I6 3.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - INGENIUM I6 3.0L Petrol >> Removal And Installation >> Radiator (G2497451) >> Installation

Radiator (G2497451): Installation

    • Install the radiator.
    • Connect the coolant hose to the radiator.
    • Install the electric cooling fan and shroud.
    • Install the 2 radiator upper mounting brackets.
    • Install and tighten the 8 bolts.

      Torque  : 9 Nm 

  3. Install the cooling module.

    Refer to: COOLING MODULE .

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals