LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Velar R-Dynamic HSE >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling INGENIUM I6 3.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - INGENIUM I6 3.0L Petrol >> Removal And Installation >> Coolant Pump - Charge Air Cooler (G2523588) >> Installation

Coolant Pump - Charge Air Cooler (G2523588): Installation

  1. Install the charge air cooler coolant pump to the bracket.
    • Install the charge air cooler coolant pump.
    • Connect the coolant hose to the charge air cooler coolant pump.
    • Install and tighten the 2 bolts.

      Torque  : 9 Nm 

    • Connect the coolant hose to the charge air cooler coolant pump.
    • Connect the electrical connector to the charge air cooler coolant pump.
  4. Install the front bumper.

    Refer to: FRONT BUMPER

  5. Fill the engine cooling system with the correct amount of coolant fluid.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals