Evaporative Emissions - INGENIUM I6 3.0L Petrol (G2523930): Overview

The evaporative emission system reduces the level of hydrocarbons released into the atmosphere by fuel vapor venting from the fuel tank.

The fuel vapor is generated by the fuel in the fuel tank. The amount of fuel vapor produced increases as the fuel temperature rises. Another source of fuel vapor generation is the refueling process. Fuel vapor can flow without restriction to the evaporative emission canister through the tank venting system.

To prevent the charcoal becoming saturated, the fuel vapor is purged from the evaporative emission canister when the engine is running under certain operating conditions. The Powertrain Control Module (PCM) operates the CPV  at the correct times. This allows fuel vapor to be drawn from the evaporative emission canister and burnt in the engine.

On North American Specification (NAS) and China market vehicles there is an additional DMTL  system. The DMTL  system allows the fuel vapor system to be pressurized and detect if a leak is present.