Integrated Electric Park Brake Switch (G2523160): Installation

• Install the integrated EPB  switch.
• Install and tighten the 4 screws.

  Torque  : 2 Nm 

• Install the integrated EPB  switch trim.
• Install the 4 clips.

• Install the transmission control knob.
• Install and tighten the screw.

  Torque  : 2 Nm 

• Install the transmission control knob trim.
• Install the 4 clips.

• Install the floor console surrounding trim.
• Install and tighten the 6 screws.

  Torque  : 2 Nm 

• Install the ICDM  .
• Install the 2 clips.
• Install and tighten the 4 screws.

  Torque  : 2 Nm 

Refer to: FLOOR CONSOLE UPPER TRIM

Refer to: STARTUP BATTERY DISCONNECT AND CONNECT