Fuel Tank Filler Pipe (G2299332): Installation
-
- Install the fuel tank filler pipe.
- Install the fuel tank filler pipe shield.
- Install and tighten the 2 bolts
Torque : 10 Nm
- Install and tighten the nut.
Torque : 10 Nm
- Tighten the clamp to the fuel tank filler pipe.
Torque : 3.2 Nm
-
- Connect the breather pipe to the fuel tank filler pipe.
- Install the 2 clips.
- Install the rear right wheel arch liner.
Refer to: REAR WHEEL ARCH LINER .
-
WARNING: After doing repairs, the fuel system must be checked visually for leaks. Failure to follow these instructions may result in personal injury.
Fill the fuel tank with the amount recovered during the fuel tank drain procedure.
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .