Auto Stop/Start Warning Indicator
Auto Stop/Start Warning Indicator - System Active
The auto stop/start warning indicator illuminates green when the engine stops during a stop/start cycle, then extinguishes when the engine restarts.
Auto Stop/Start Warning Indicator - System Disabled
The auto stop/start warning indicator illuminates white when the auto stop/start system is disabled.
The auto stop/start warning indicator is controlled by the Powertrain Control Module (PCM). To illuminate the auto stop/start warning indicator, the Powertrain Control Module (PCM) sends a signal to the Body Control Module/Gateway Module (BCM/GWM) via the FlexRay bus. The BCM/GWM transmits the message to the IC via the High Speed (HS) Controller Area Network (CAN) comfort systems bus.