LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - INGENIUM I4 2.0L Petrol -- Range Rover EVOQUE/L551 ( Specifications - Removal & Installation) >> Engine - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Variable Flow Oil Pump With Integral Vacuum Pump (G2340849) >> Installation

Variable Flow Oil Pump With Integral Vacuum Pump (G2340849): Installation

    • Install the variable flow oil pump with integral vacuum pump.
    • Install and tighten the 4 bolts.

      Torque  : 25 Nm 

    • Install the 4 wiring harness clips.
    • Connect the electrical connector.
  3. Install the oil pump drive chain.

    Refer to: OIL PUMP DRIVE CHAIN .

scientia non olet · About LEMON Manuals