Left Powertrain Mount Bracket (G2318451): Installation

The following step(s) applies to: 

All vehicles 

1. • Install the left powertrain mount bracket.
   • Install and tighten the 4 bolts.

     Renew Part: Left powertrain mount to transmission bolt(s) Quantity: 4 . 

     Torque  : 80 Nm 

   • Install the transmission wiring harness clip.
2. • Reposition the transmission wiring harness.
   • Install and tighten the bolt.

     Torque  : 12 Nm 

3. Raise the powertrain assembly.

4. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   Make sure the left powertrain mount is correctly aligned.

5. Install and tighten the 3 left powertrain mount upper bolts.

   Renew Part: Left powertrain mount upper bolt(s) Quantity: 3 . 

   Torque 

   1. Stage 1: 70 Nm 
   2. Stage 2: 120° 
6. Remove the trolley jack and wooden block.
7. Install the transmission breather pipe clip.
8. • Install the startup battery tray bracket.
   • Install and tighten the 2 bolts.

     Torque  : 12 Nm 

   The following step(s) applies to: 

   Mild Hybrid Electric Vehicles 

9. Install the MHEV battery cable clip.

   The following step(s) applies to: 

   All vehicles 

10. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD .

11. Install the startup battery tray.

    Refer to: STARTUP BATTERY TRAY .

12. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .