Engine Front Cover - Vehicles With: Non-Electric Vehicles (G2308407): Removal

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.

NOTE:

This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING .
Remove the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY - VEHICLES WITH: NON-ELECTRIC VEHICLES .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the bolt cover.
- Remove the bolt.
- Remove the idler pulley.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the bolt cover.
- Remove the bolt.
- Remove the idler pulley.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the 12 bolts.
- Remove the engine front cover.