LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - INGENIUM I4 2.0L Petrol -- Range Rover EVOQUE/L551 ( Specifications - Removal & Installation) >> Engine - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Crankshaft Front Seal - Vehicles With: MHEV (G2298799) >> Installation

Crankshaft Front Seal - Vehicles With: MHEV (G2298799): Installation

  1. G14428987Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install a new crankshaft front seal to the special tool.

      Special Tool(s): JLR-303-1628 

    • Install the special tool and the crankshaft front seal.
    • Use the special tool to tighten the crankshaft front seal.

      Torque  : 26 Nm 

    • Remove the special tool.
  2. Install the crankshaft pulley.

    Refer to: CRANKSHAFT PULLEY - VEHICLES WITH: MHEV .

  3. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

scientia non olet · About LEMON Manuals