Oil Pan
| ITEM | DESCRIPTION |
|---|---|
| 1 | Oil level gauge |
| 2 | Oil level gauge tube |
| 3 | Oil pan |
| 4 | Sealing washer |
| 5 | Oil pan drain plug |
| 6 | Bolt - Oil pan (quantity 16) |
NOTE:
Use a new oil pan drain plug and washer assembly after they are removed.
The oil pan is an aluminum alloy high pressure die casting and is located below the cylinder block. The oil pan is sealed to the cylinder block with a bead of the room temperature vulcanization sealant. The oil pan is secured with 14 bolts and 2 shoulder bolts that locate the oil pan to the cylinder block. The oil pan contains the variable flow oil pump with integral vacuum pump, oil pick up pipe, windage tray and oil level gauge. The oil is drained through removal of a oil pan drain plug and washer located on the right of the oil pan.