LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- Range Rover EVOQUE/L551 >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Engine Coolant Temperature Sensor (G2278268) >> Installation

Engine Coolant Temperature Sensor (G2278268): Installation

  1. Install the Engine Coolant Temperature (ECT) sensor.
  2. Install the ECT sensor clip.
  3. Connect the ECT sensor electrical connector.
  4. Vacuum fill the coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

  5. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD .

  6. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .

scientia non olet · About LEMON Manuals