Coolant Pump - Charge Air Cooler (G2110298): Installation
-
- Install the charge air cooler coolant pump.
- Install and tighten the bolt.
Torque : 5.4 Nm
- Connect the 2 coolant hoses.
-
- Connect the electrical connector.
- Secure the clip.
- Vacuum fill the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
- Install the engine undershield.
Refer to: ENGINE UNDERSHIELD .
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .