LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Harnesses -- Range Rover EVOQUE/L551 >> Wiring Harnesses >> Removal And Installation >> Instrument Panel Wiring Harness (G2300193) >> Installation

Instrument Panel Wiring Harness (G2300193): Installation

    • Install the instrument panel wiring harness.
    • Install the 20 wiring harness clips.
    • Install and tighten the 4 ground bolts.

      Torque  : 9 Nm 

    • Connect the electrical connector to the airbag wiring harness.
  2. Install the instrument panel cross-car beam.

    Refer to: INSTRUMENT PANEL CROSS-CAR BEAM .

  3. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals