LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- Range Rover EVOQUE/L551 >> Power Brake Actuation >> Removal And Installation >> Variable Flow Oil Pump With Integral Vacuum Pump - INGENIUM I4 2.0L Diesel (G2318176) >> Installation

Variable Flow Oil Pump With Integral Vacuum Pump - INGENIUM I4 2.0L Diesel (G2318176): Installation

    • Install the variable flow oil pump with integral vacuum pump.
    • Install and tighten the 4 bolts.

      Torque  : 25 Nm 

    • Install the 4 wiring harness clips.
    • Connect the electrical connector.
  3. Install the oil pump chain.

    Refer to: the appropriate service information

scientia non olet · About LEMON Manuals