Brake Booster - Left Hand Drive, Vehicles With: MHEV/Non-Electric Vehicles (G2313163): Installation
- Install the brake booster.
- Install and tighten the 4 nuts.
Torque : 25 Nm
- Install and secure the new brake booster to brake pedal pin.
Renew Part: Brake booster to brake pedal pin Quantity: 1 .
- Install the brake booster vacuum sensor to the brake booster.
- Install the brake master cylinder.
Refer to: BRAKE MASTER CYLINDER - LEFT HAND DRIVE .
- Install the instrument panel lower trim panel.
Refer to: INSTRUMENT PANEL LOWER TRIM PANEL .
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .