LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Evoque R-Dynamic S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Front Disc Brake -- Range Rover EVOQUE/L551 >> Front Disc Brake >> Removal And Installation >> Brake Hose (G2469699) >> Installation

Brake Hose (G2469699): Installation

    • Install and tighten the brake hose to the brake caliper.

      Torque  : 35 Nm 

    • Install the brake hose into the shock absorber bracket.
    • Install the brake hose clip.
  3. CAUTION: Make sure that the brake hose is not twisted and is correctly located.
    • Install the brake hose into the body bracket.
    • Install the brake hose clip.
    • Tighten the brake hose union.

      Torque  : 15.5 Nm 

    • Install the lower section of the wheel arch liner.
    • Install and tighten the 2 nuts.
    • Install the 2 clips.
    • Secure the 6 wiring harness clips.
  6. Bleed the brake caliper.

    Refer to: BRAKE SYSTEM PRESSURE BLEEDING - VEHICLES WITH: MHEV/NON-ELECTRIC VEHICLES .

  7. Install the wheel and tire.

    Refer to: WHEEL AND TIRE .

scientia non olet · About LEMON Manuals