Brake Caliper Carrier - Vehicles With: PHEV (G2740566): Removal
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Use the Jaguar Land Rover (JLR) approved diagnostic equipment to activate the Integrated Power Brake assembly mode.
General Equipment: Jaguar Land Rover approved diagnostic equipment
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING .
- Remove the front wheels and tires.
Refer to: WHEEL AND TIRE .
- Remove the front brake pads.
Refer to: BRAKE PADS - VEHICLES WITH: PHEV .
- Remove and discard the 2 bolts.
- Remove the brake caliper carrier.