Front Wheel Arch Liner (G2298868): Installation
-
- Install the rear section of the front wheel arch liner.
- Install the fastener.
- Install and tighten the 2 screws.
-
- Install the front section of the wheel arch liner.
- Install and tighten the screw.
- Install the 8 fasteners.
-
- Install the front wheel arch inner molding.
- Install the 2 fasteners.
- Install and tighten the 2 nuts.
- Install and tighten the 2 nuts.
- Secure the brake pad wear sensor and shock absorber and wheel speed sensor wiring harnesses.
- Install the wheel and tire.
Refer to: WHEEL AND TIRE .