Roof Opening Panel Blind Faults - Remedial Actions
NOTE:
If the roof opening panel blind is de-normalised the roof glass cannot open (roof opening panel blind position is not known). If the roof glass is de-normalised the roof opening panel blind cannot close (roof glass position is not known)
| FAULT TYPE | REMEDIAL ACTION |
|---|---|
|
Check the body control module for related DTC s and refer to the relevant DTC index. Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind as detailed below |
|
Check the body control module for related DTC s and refer to the relevant DTC index. Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind as detailed below |
|
Check the guide rails and mechanism for any signs of damage or debris and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind as detailed below |
|
Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind as detailed below |