Front Overhead Console (G2299307): Installation
-
NOTE:
- Only do the following step(s) if the component was previously removed.
- Make sure that all the clips are correctly installed.
- Install the Interior Motion Sensor (IMS) module.
- Install the 3 motion sensors.
- Install the 3 wiring harnesses.
-
- Install the wiring harness.
- Connect the 2 electrical connectors.
-
CAUTION: Take extra care not to damage the clips.
- Install the microphone.
- Connect the electrical connector.
- Install the wiring harness.
-
NOTE: Make sure that all the clips are correctly installed.
- Connect the 2 roof harness electrical connectors.
- Install the front overhead console.